1. Verify the installed Driver-Version:
  2. Copy Update Bundle via SCP to affected Host:
  3. Put Host in Maintenance Mode (All VMs need to be migrated or Power off for that)
  4. Connect via SSH and unzip File:
  5. Install Offline-Bundle:

    You see on the marked Area that Reboot is needed to apply changes!
  6. Reboot Host:
  7. End Maintenance Mode after Host is up again:

New Driver should now be installed and working properly. If needed it can be checked by connect to Host again and do the first Step of this Howto again:

In this Case Driver was successfully updated.

Martin Kaufmann
Dell | Solution Support Team

Disclaimer:
This Article is written as a recommendation for you. Every article is checked by a technical specialist. Please be informed that as of a high count of articles not all are checked direct after publication. If you have any feedback regarding our articles, please don't hesitate to contact us via DellHilftPro(at)Dell.com