This Article is written as a recommendation for you. Every article is checked by a technical specialist. Please be informed that as of a high count of articles not all are checked direct after publication. If you have any feedback regarding our articles, please don't hesitate to contact us via DE_LEJ_GSD_DTCG(at)Dell.com .


Please Note before Update:

- Do a backup of your data!
- The update-process could take up to 30 minutes and both EMM will be restarted.
- For the update the primary storage have to be in the optimal-state.
- We recommend to do the Update in a Downtime, cause the IO to the expansion enclosure will be stopped during the update.
- Please check the compatibility-guide of your software-/OS-vendor if the Firmware is approved.


This manual describe how to update a MD3060e, which is attached to a MD32x0, MD32x0i or MD36x0f.

  1. Please download the needed Firmware of the MD32x0 (SAS) or MD32x0i/MD36x0i (iSCSI), MD36x0f (Fibrechannel) - according to the primary Chassis.

    1. Firmware: MD32x0 [07.84.53.60] Download
    2. Firmware: MD32x0i [07.84.53.60] Download
    3. Firmware: MD36x0f [07.84.53.60] Download
    4. Firmware: MD36x0i [07.84.53.60] Download

  2. Extract the downloaded controller-firmware.
  3. Please be shure that the current Firmware is installed to the Main Chassis.
  4. Update the firmware as follows:
    1. Open the Modular Disk Storage Manager (MDSM) and connect to the primary chassi you want to update.
    2. Choose the menue Update.
    3. Now choose EMM-Firmware... .
      This Menue is only shown if one or more MD3060e are attached.
    4. Please choose the all Enclosure you want to update from the shown list. If you want to update all attached expansion-enclosure you can also mark the checkbox Select All.
    5. Now click Select File and please choose the File with the Ending *.bin.
    6. If you clck the Start-Button you will begin the Update.